IP Addresses, Ports, and Tunnels: Explanation for Beginners

Every time you access a website or make a video call, your computer shares information with devices it does not even know. However, it manages to get away from it all unharmed due to three easy-to-grasp concepts: IP addresses, ports, and tunnels.

By the end of this tutorial, you will learn about them in detail and understand why each of them is important for your personal safety.

What an IP Address Really Means


As the name suggests, an IP address is an identification number on a network, just as an address identifies a person’s residence. Every time your laptop or any other device queries a website or a server, it shares its IP address with it in order to get an answer back later.

There are two existing versions of IP addresses: IPv4 and IPv6. The former has the format 192.168.1.10. Four groups of numbers ranging from 0 to 255 make up a total of 4.3 billion combinations, which were not enough.

Thus, IPv6 was invented, featuring 340 undecillion combinations. The IPv6 address looks longer and is written in hexadecimal: 2001:db8::1.

Public and Private Addresses


Two types of addresses coexist on a home network. Your router gets a public IP address from your ISP, which is the address that every website sees. On the other hand, your router assigns private addresses to your devices in ranges like 192.168.x.x or 10.x.x.x.

Your router uses NAT technology in order to enable all these devices to use one public address. The router remembers which device queried for what, so that every answer gets to the right device. That is why every website can usually determine which city an IP address belongs to.

However, it cannot understand which device sent a certain query within the same household.

How Ports Help Identify Services


The IP address gets the data to the right device. However, it is obvious that a certain device works with several programs simultaneously. An IP address may be compared to a building and a port to a room within the building.

Ports are numbered from 0 to 65,535, and several services are assigned to particular ports:

  • Port 443 for secure sites (HTTPS).
  • Port 80 for plain web traffic (HTTP).
  • Port 53 for DNS (Domain Name System), responsible for translating domain names like example.com to IP addresses.
  • Port 22 for SSH, used for logging in to remote servers.

When you enter a website with encryption, your browser connects to port 443 on the server’s IP address, choosing a temporary port for itself to receive the response from it.

Firewall filters also operate with the help of ports. That is why allowing or blocking access to some particular ports must be done very carefully and cautiously. If you decide to open a certain port through the router’s configuration (this process is called port forwarding), remember to do it only if you know exactly why you need to do it.

How Tunnels Operate


Tunneling means encapsulation of network traffic in other network traffic. Original data packets are put into a new data packet in order to deliver them to a certain endpoint.

Afterward, the outer layer is removed, and the original packet goes on its way. Tunnels are applied by companies in order to connect office networks with one another, connect IPv6 with IPv4 traffic and vice versa, or enable staff members to connect to internal servers from outside of the network. The most well-known example is a Virtual Private Network (VPN).

Every time you start using your VPN app, it creates an encrypted tunnel from your device to the remote server. Any transmitted data goes through the tunnel. Your Internet provider and everyone else who uses the network (for example, your Wi-Fi connection) sees only the fact that your device is connected to the VPN server, but they cannot see which websites you browse and what data you transmit.

In contrast to your local ISP or Wi-Fi administrator, websites see only the IP address of the VPN server rather than yours.

Nowadays, most VPN services use protocols such as WireGuard, OpenVPN, and IKEv2/IPSec. As more and more companies choose WireGuard because of its speed and small amount of code to be audited, it has turned into a default protocol.

However, tunneling technology has its limitations: the provider sees your traffic as soon as it leaves their server, so selecting a trustworthy provider matters. A VPN is powerless regarding your login and password, as well as malware.

How the Three Fit Together


Imagine checking your emails on hotel Wi-Fi when you are using a VPN service. You send your data to port 993 at the mail server’s IP address. Then, your VPN service packages and encrypts the message, sends it to its server, unpacks it, and sends it to your email service.

Conclusion

An IP address tells data which destination it should take, ports identify which program should receive the data, and tunnels give new routing paths and protect data from readers.

Once you understand how these three components work, using the router’s settings page, firewall messages, and operating a VPN become much more understandable. A good idea would be to sign in to your router’s administrative page in order to compare your public and private IP addresses.

DEEPAK GUPTA

DEEPAK GUPTA

Deepak Gupta is the Founder of Scientech Easy, a Full Stack Developer, and a passionate coding educator with 8+ years of professional experience in Java, Python, web development, and core computer science subjects. With strong expertise in full-stack development, he provides hands-on training in programming languages and in-demand technologies at the Scientech Easy Institute, Dhanbad.

He regularly publishes in-depth tutorials, practical coding examples, and high-quality learning resources for both beginners and working professionals. Every article is carefully researched, technically reviewed, and regularly updated to ensure accuracy, clarity, and real-world relevance, helping learners build job-ready skills with confidence.